Stick Insulation Hangers
our stick insulation hangers are fabricated out of a 50×50mm base with a pin. Popular material is galvanized steel. We also accept the order for other material, such as stainless steel. They are glued to metal exterior panels every 400mm apart, the stick insulation hangers penetrate through the fiberglass blanket and through the facing, then secured with a self locking washer or a dome cap washer to fasten the insulation.
Product Specification
Product Name |
Stick insulation hangers |
Base Material |
Stainless steel or Galvanized steel |
Pin Diameter |
Stainless steel, Aluminum, galvanized steel |
Base size |
50×50mm( 2”×2”) |
Pin diameter |
2.7mm( 12 Gauge) |
Pin length |
41mm, 50mm 63mm, 89mm, 114mm, 203mm. |
Application |
Building insulation,Duct Insulation |
Packing
Product |
Quantity |
Box size |
Weight |
41mm stick insulation hangers |
500Pcs |
35×35×20CM |
4.55KG |
50mm stick insulation hangers |
500Pcs |
35×35×24CM |
4.7KG |
63mm stick insulation hangers |
500Pcs |
35×35×26CM |
5.00G |
89mm stick insulation hangers |
500Pcs |
35×35×30CM |
6.15KG |
114mm stick insulation hangers |
500Pcs |
35×35×35CM |
6.50KG |
203mm stick insulation hangers |
250Pcs |
35×35×35CM |
3.85KG |
FAQ
1: Q: what is the difference between stick insulation hangers and the self stick insulation hangers?
A: in fact, they are almost same, when you load the heavy insulation, you will use the stick insulation hangers
2: Q: what is the apart from the stick insulation hangers when you install them on the surface?
A: this will depend on the insulation material. We usually have them 400mm apart.
3: Q: Can you make them in aluminum material?
A: Yes, we can manufacture the stick insulation hangers in aluminum, we can make them in stainless steel too. We will manufacture them upon customer’s requirement.
our stick insulation hangers are fabricated out of a 50×50mm base with a pin. Popular material is galvanized steel. We also accept the order for other material, such as stainless steel. They are glued to metal exterior panels every 400mm apart, the stick insulation hangers penetrate through the fiberglass blanket and through the facing, then secured with a self locking washer or a dome cap washer to fasten the insulation.
Product Specification
Product Name |
Stick insulation hangers |
Base Material |
Stainless steel or Galvanized steel |
Pin Diameter |
Stainless steel, Aluminum, galvanized steel |
Base size |
50×50mm( 2”×2”) |
Pin diameter |
2.7mm( 12 Gauge) |
Pin length |
41mm, 50mm 63mm, 89mm, 114mm, 203mm. |
Application |
Building insulation,Duct Insulation |
Packing
Product |
Quantity |
Box size |
Weight |
41mm stick insulation hangers |
500Pcs |
35×35×20CM |
4.55KG |
50mm stick insulation hangers |
500Pcs |
35×35×24CM |
4.7KG |
63mm stick insulation hangers |
500Pcs |
35×35×26CM |
5.00G |
89mm stick insulation hangers |
500Pcs |
35×35×30CM |
6.15KG |
114mm stick insulation hangers |
500Pcs |
35×35×35CM |
6.50KG |
203mm stick insulation hangers |
250Pcs |
35×35×35CM |
3.85KG |
FAQ
1: Q: what is the difference between stick insulation hangers and the self stick insulation hangers?
A: in fact, they are almost same, when you load the heavy insulation, you will use the stick insulation hangers
2: Q: what is the apart from the stick insulation hangers when you install them on the surface?
A: this will depend on the insulation material. We usually have them 400mm apart.
3: Q: Can you make them in aluminum material?
A: Yes, we can manufacture the stick insulation hangers in aluminum, we can make them in stainless steel too. We will manufacture them upon customer’s requirement.