Insulation hanger/ perforated base insulation hanger
Insulation stick pins and washers are used to fasten heavier insulation materials to surfaces that self adhesive insulation hangers can’t work to. Each insulation stick pin has 44 holes on the perforated base. The 44 holes are used to grab the adhesive or allow a screw/nail to hold the base in place. Once the insulation material is pierced onto the pin, a self locking washer can be installed to hold the insulation in place.
Product Specification
|
Product Name |
Insulation stick pins |
|
Base Material |
Stainless steel or Galvanized steel |
|
Pin Diameter |
Stainless steel, Aluminum, galvanized steel |
|
Base size |
50×50mm( 2”×2”) |
|
Pin diameter |
2.7mm( 12 Gauge) |
|
Pin length |
41mm, 50mm 63mm, 89mm, 114mm, 203mm. |
|
Application |
Building insulation,Duct Insulation |
Packing
|
Product |
Quantity |
Box size |
Weight |
|
41mm insulation stick pins |
500Pcs |
35×35×20CM |
4.55KG |
|
50mm insulation stick pins |
500Pcs |
35×35×24CM |
4.7KG |
|
63mm insulation stick pins |
500Pcs |
35×35×26CM |
5.00G |
|
89mm insulation stick pins |
500Pcs |
35×35×30CM |
6.15KG |
|
114mm insulation stick pins |
500Pcs |
35×35×35CM |
6.50KG |
|
203mm insulation stick pins |
250Pcs |
35×35×35CM |
3.85KG |
+86-180287943417